CyberData 010881, Руководство по эксплуатации

Страница: 16 / 38

CyberData Corporation 930109C VoIP Zone Controller 4-Port Audio Out Operations Guide
Implementing the VoIP Zone Controller
Configuring the VoIP Zone Controller
10
At this point you can:
●
Review the VoIP Zone Controller’s
Current Settings
. Use the RTFM switch to restore the factory
default settings. See Section 2.3.4, "Restore the Factory Default Settings as Required" .
●
Configure the network parameters. Click Network Setup and refer to Section 2.4.3, "Configure
the Network Parameters" for instructions.
●
Configure the Admin parameters. Click Admin Settings and refer to Section 2.4.4, "Change the
Default Username and Password" for instructions.
●
Configure the SIP parameters. Click
SIP Setup
and see Section 2.4.5, "Configure the SiP
Parameters" .
●
Configure the Zones parameters. Click Zones Setup and refer to ....for instructions.
Note Click the Upgrade Firmware button any time you need to upload new versions of the
firmware or Reboot the VoIP Zone Controller. Refer to Section 2.7, "Upgrading the
Firmware" and Section 2.8, "Rebooting the VoIP Zone Controller" for instructions.
2.4.3 Configure the Network Parameters
Configuring the network parameters enables your network to recognize the VoIP Zone Controller
and communicate with it. Click
Network Setup on the Home page to open the Network
Configuration page.
DNS Server 2 Shows the DNS Server 2 address.
Link to the Network Setup web page.
Link to the Admin Settings web page.
Link to the SIP Setup web page.
Link to the Zones Setup web page.
Link to the Upgrade Firmware web page.
Table 2-1. Home Page Overview (continued)
Web Page Item Description