CyberData 010881, Руководство по эксплуатации

Страница: 12 / 38

CyberData Corporation 930109C VoIP Zone Controller 4-Port Audio Out Operations Guide
Implementing the VoIP Zone Controller
Setting up the VoIP Zone Controller
6
2.3.3 Confirm that the VoIP Zone Controller is Up and Running
The indicator lights on the front of the VoIP Zone Controller verify the unit’s operations.
Figure 2-4. VoIP Zone Controller Indicator Lights
2.3.3.1 Confirm Power on, Network Connectivity, and Baud Rate
When you plug in the Ethernet cable or power supply:
●
The round, blue Status light on the front of the VoIP Zone Controller comes on indicating that
the power is on. Once the device has been initialized, this light blinks at one second intervals.
●
The square, green Link light above the Ethernet port indicates that the network connection has
been established. The Link light changes color to confirm the auto-negotiated baud rate:
• This light is yellow at 10 Mbps.
• It is orange at 100 Mbps.
●
The green Paging light comes on after the device is booted and initialized. This light blinks
when a page is in progress.
2.3.3.2 Verify Network Activity
The square, yellow Act light blinks when there is network activity.
RTFM switch
On when network connection is established
Link
Orange when baud rate = 100Mbps
Yellow when baud rate = 10Mbps
Blinks to indicate network activity Act.
Status
Paging
Blinks when unit is up and running
Blinks when unit is paging