CVS #271245, Инструкция по эксплуатации

Страница: 12 / 32

10
c) When the device has detected your pulse, the heart
symbol in the display begins to blink and a beep tone
is audible for every pulse beat.
d) When the measurement has been concluded, a long
beep tone sounds. The measured systolic and diastolic
blood pressure values as well as the pulse are now
displayed.
e) The measurement results are displayed until you
switch the device off. If no button is pressed for
5 minutes, the device switches off automatically.
5.5. Memory – displaying the last measurement
The measured results are stored in the instrument. This
unit stores 99 measurements. You can call up the stored
values at any time by pressing the MEMORY button. The
first memory displayed will show an A for average. This
is an average of all measurements stored in the memory.
If you press the memory a second time, you’ll see the
most recent measurement taken. Keep pushing the
button to scroll back through memories.
5.6. Discontinuing a measurement
If it is necessary to interrupt a blood pressure
measurement for any reason (e.g the patient feels unwell),
the On/Off button can be pressed at any time. The device
then immediately lowers the cuff pressure automatically.
☞ Further information
Measurements should not occur soon after each other, since the results will be innacurate. Wait several
minutes in a relaxed position, sitting or lying, before you repeat a measurement.
MR