manualshive.com logo in svg

CVO Fire FIRE LINE FLUELESS, Техническое руководство и руководство пользователя, Страница: 28 / 34

Поделиться
Скачать
CVO Fire FIRE LINE FLUELESS Скачать руководство пользователя страница 28

Page 28 of 34 

General Information  

 

This fire must be installed by a qualified GAS SAFE Engineer and inline with 
current regulations.  
 
This fire is intended for decorative purposes. Any purpose-provided 
ventilation should be checked regularly to ensure that it is free from 
obstruction.  
 

It is advised to have this appliance serviced every 12 months by a 
registered GAS SAFE engineer.  

 
Do not throw rubbish on to the surface of the fire. Debris or soot formed, 
should be removed from time to time, see ‘Cleaning instructions’. 
 

Pilot Assembly:

 The pilots ODS (Oxygen depletion sensor) must not be put 

out of operation. The user must not adjust the pilot. 
 
If any of its parts are damaged and need to be exchanged the original 
manufacturers parts must be used. There are no user replacement parts. 
 
The pilot light and flame sensing device  fitted  to  this  fire  is  also  an 
atmosphere sensing device, which shuts off both the main burner and pilot if 
evacuation of the combustion products is interrupted. If the fire shuts itself 
off, restart the fire following the procedure in section ‘Lighting the fire’.  If 
the fire continues to shut itself off do not use the fire and have the fire 
checked by a suitably qualified person. 
 
Once the fire has been checked and remedial action taken, the fire is ignited 
in the manner depicted in section ‘Lighting the fire’. 
 
Due to the newness of materials, the fire may give off a slight smell for a 
period of time after commissioning. This is quite normal and any odours 
should disperse within a few hours of operation. 
 

Fire Guards:

 A fireguard is not supplied with this appliance and it is 

recommended that a fireguard conforming to the requirements of BS6539 or 
BS6778 be fitted if the fire is used in the presence of young children, the 
elderly or the infirm.  Fireguards are readily available online or from most 
large DIY Stores. 

 

Содержание FIRE LINE FLUELESS



































Отзывы:

Нет отзывов