CVO Fire Double Sided Fire Ribbon, Техническое руководство

Страница: 10 / 46

Page 10 of 46
Power Supply
Read through this section before starting the installation. The installation should only be
carried out by a GAS SAFE registered installer and in accordance with national and local
regulations for both gas and electricity.
Power Supply 230v AC-15%+10%, 50/60 Hz
Max power consumption 20VA cos 0.6 (Peak)
Stand-by power consumption 1W
Ambient Temperature 0.80 C
Protection IP 20
Humidity Max 95% at 40c
Electrical protection Not required
Connections STELVIO/STOCKO
Waiting time for demand 3-5 seconds typically
Ignition Time 20 seconds typically
Ignition Frequency 1Hz
Spark gap Max 6mm
Ignition Cable length 500mm
The black lead is the electrical feed to the burner, a 3 amp fused spur located wherever
convenient is to be connected between the power supply and the burners black lead. The
Grey or white wire is connected to the hardwire switch which if used, can be positioned
as required. NOTE- DO NOT connect the Hardwire switch to the mains, as this will damage
the unit.
A mains connection is required close to the fireplace-a 0.7m cable is provided for this
purpose with a special plug connected to the burner control box.
A 3amp socket may be used, or a fused spur outlet can be purpose provided.
The colour code of the mains is as follows;
Green/Yellow - EARTH
Brown - LIVE
Blue - NEUTRAL
The appliance must be in a position so that the mains supply is accessible for routine
maintenance. A 3amp fuse should be fitted in the plug of fused spur.
WARNING – This appliance must be earthed.