CVO Fire Double Sided Fire Ribbon, Техническое руководство

Страница: 25 / 46

Page 25 of 46
Fitting the Stone Fascia
Stone Fascia Hanging Bracket Positioning
Note: the Enclosure on the Stone Fascia Version must protrude by a total of 20mm from the wall.
If this is not done flame performance will be affected and possible enclosure and burner damage
will occur. This is NOT covered by the warranty.
The Wall bracket is supplied in 2 pieces. The first part is bonded to the stone at the factory. The
second part is fixed to the wall. The fascia is supplied with the wall bracket attached. Remove the
4 cross headed screws, remove the wall bracket and put the fascia and screws in a safe place.
Ensure the wall is flush before fitting the fascia. Position the wall bracket as shown below.
Measure the dimension as shown below from top of enclosure lintel to the top edge of the wall
bracket. The fascia is very heavy and the wall bracket must be secured into a solid surface using
suitable screws & rawl plugs to ensure it cannot fall or be pulled from the wall.
Ventilation Air Intake.
For the burner to work correctly there should be an air
intake cut-out below the front shelf as shown in the
above image. This air void provides burner ventilation
to ensure the flame remains stable and the remote
system remains cool. The Air Flow is provided via the
from fascia lower intake. Failure to ensure this will
result in serious damage to the remote system. This
damage is not covered by the warranty.
Hanging the Stone Fascia.
With the help of an assistant, lift the fascia into place.
Unclip the remote magic eye and plug into the remote
control (as shown on wiring diagram).
Once the remote is attached lift the fascia on to the
wall bracket. Refit the 4 cross headed screws and
ensure fascia is secure.
WARNING: The fascia must never be sealed or built
flush into the wall. The Fascia has an air vent at the
lower edge. This with Air Intake provides ventilation to
the burner unit. If this is blocked or the fascia not fitted
in the way shown then serious damage to the burner
and remote system will result. This damage is NOT
covered by the warranty. See image left.