TROUBLESHOOTING
SAW WILL NOT START
POTENTIAL CAUSE
REMEDY
1. Power cord is not plugged in.
1. Check power connection/
extensions to power source.
2.
Fuse or breaker tripped.
2. Replace fuse or reset tripped
circuit breaker.
3. Damaged power cord.
3. Inspect cord for damage, if
damaged replace at authorized
repair shop before use.
4.
Burned out switch.
4.
Have switch replaced by
authorized repair shop.
5.
Trigger does not turn tool on.
5.
Have switch replaced by
authorized repair shop.
BLADE DOES NOT COME UP TO SPEED
POTENTIAL CAUSE
1. Wrong extension cord (too
light or too long).
REMEDY
1. Replace with adequate cord.
2. Low building voltage
2.
Contact your electricity provider
or check on-site power source.
EXCESSIVE TOOL VIBRATION
POTENTIAL CAUSE
1. Out of balance blade.
2. Materials not secured or
supported properly.
REMEDY
1. Install new blade and discard
old blade.
2. Secure work piece with clamps
or supports as shown in manual.
27
