Blade Attachment/Removal
1) Remove the dust cover assembly (as indicated above).
Figures
7
Oa and b. Depress blade lock button while using bolt
wrench. Arbor bolt wrench is stored round sleeve above thumb in
left image. Turn wrench clockwise to loosen.
2)
Press and hold the lock button and turn the
(blade arbor
bolt)
"clockwise" with wrench to loosen. Remove
arbor bolt
and
arbor cap.
The blade will be free to remove.
Arbor bolt (inside)
Figures
7 7
a
-
c. Arbor without blade (lower guard spring to upper
left of arbor), bolt and replaced blade. Blade must be securely
fitted to arbor. Lock blade and turn counter-clockwise to seat
arbor and secure blade.
3) Note: Use caution while performing these tasks, as moving
parts may cause personal injury and blade teeth are shape.
Inspect
lower guard spring
and
cable pulley
for cleanliness
and proper operation. Depress the
lower guard actuator
switch
to observe proper function.
4) Only use specified blades for the tool
as they are recessed
and the direction of the teeth can only go one way. Place the
blade on the blade arbor.
(continued on next page)
17
