Do not use dull or damaged blades.
Dull, damaged or
improperly secured blades produce excessive friction during
cutting, which causes binding and kickback.
Extra caution should be taken when making a "plunge cut"
into existing walls or other blind areas.
The protruding blade
may become pinched or bound on unexpected material.
Ensure that depth and bevel adjustment locking mechanisms
are secure before making any cut.
If the adjustment shifts
during operation, it may cause kickback or loss of control.
Avoid unnecessary or excessive cut depth settings.
Excessive blade exposure increases the possibility of
binding and friction which cause kickback.
Never place your hand behind the saw blade.
Kickback could
cause the saw to jump back and cut your hand.
FUNCTIONAL DESCRIPTION
FIGURE
7.
Straight Flush Saw
Maximum Capacities
Blade Size
Blade Arbor
Depth of cut at 90
°
Depth of cut at 45
°
Depth of cut at 65
°
Front nose depth cut
10
8-1 /2"
Hole Proprietary Recessed/Hex
3-1/8"
2-1/4"
1-3/8"
1-9/16"
