Custom Audio Electronics VK80, Руководство пользователя

Страница: 96 / 116

11.3 Alignment parameters
The “alignment point” is deined as the position inside the ticket to use for the notch alignment.
The distance between the notch edge and the alignment point is deined as “Notch Distance”.
The value of “Notch Distance” varies from -5mm minimum and 32mm maximum (this value is ix according to the mechani
-
cal distance between black mark sensor and printing head).
If the “Notch Distance” value is set to 0, the alignment point is set at the beginning of the black mark.
negative values of “Notch Distance”
0
- +
alignment point
alignment point
alignment point = black mark front
positive values of “Notch Distance”
PRINTING DIRECTION
The following igure shows an example of paper with alignment point set by a positive value of “Notch Distance” (“Notch
Distance” = + A):
+A
0
alignment point black mark front
PRINTING DIRECTION
96