Custom Audio Electronics VK80, Руководство пользователя

Страница: 56 / 116

6.4 Printer parameters
The device
allows the coniguration of the parameters listed in the following table.
The parameters marked with the symbol
D
are the default values.
Settings remain active even after the device has been turned off and they are stored in non-volatile memory.
VK80 200 REAR, VK80 200 LAT
ATTENTION:
Any changes to network parameters will interrupt browser connection. If the server not responding you must reconnect
to the new IP address set.
IP ADDRESS IP address of device; this parameter is assigned by the network administrator.
NOTE: Press the FORM FEED key to modify the value of the highlighted digit.
Pressing LINE FEED key to move the cursor on the next digit (if the cursor is on the latest digit, proceed to
next parameter by pressing the LINE FEED key).
SUBNET MASK
This parameter identiies the local network address.
NOTE: Press the FORM FEED key to modify the value of the highlighted digit.
Pressing LINE FEED key to move the cursor on the next digit (if the cursor is on the latest digit, proceed to
next parameter by pressing the LINE FEED key).
DEFAULT GATEWAY
This parameter identiies the Gateway IP address used to send applications to the external
network
NOTE: Press the FORM FEED key to modify the value of the highlighted digit.
Pressing LINE FEED key to move the cursor on the next digit (if the cursor is on the latest digit, proceed to
next parameter by pressing the LINE FEED key).
MAC ADDRESS
This is the number, provided by the constructor, that identiies the printer; this number is
univocal.
NOTE:
This parameter can’t be modiied by set up.
RS232 BAUD RATE Communication speed of the serial interface:
115200 9600
57600 4800
38400 2400
19200
D 1200
NOTE: Parameter valid only with serial interface.
RS232 DATA LENGTH Number of bit used for characters encoding:
7 bit/car
8 bit/car
D
NOTE: Parameter valid only with serial interface.
56