Custom Audio Electronics VK80, Руководство пользователя

Страница: 58 / 116

SPEED / QUALITY Setting of printing speed and printing quality:
High Quality
Normal
D
High Speed
Very High Speed
NOTCH/B.MARK
ALIGNMENT Alignment management:
Disabled D = the notch/black mark alignment is not performed
Enabled = the notch/black mark alignment is performed
NOTCH/B.MARK
THRESHOLD Threshold value for the recognition of the presence of notch/black mark by the black
mark sensor:
0.33V D 0.99V 1.65V 2.31V 2.97V
0.66V 1.32V 1.98V 2.64V
NOTA: if the “Notch Alignment” parameter is disabled, this parameter is not printed.
NOTCH DISTANCE “Notch Distance” is the minimum distance (in mm) between the upper edge of ticket and
the notch (see chapter 11).
The numeric value of the distance is made up with the following three parameters for the
setting of two digits for the tens and the units and of the sign:
NOTCH DISTANCE SIGN
Sign setting:
+
D
= positive distance
- = negative distance
NOTCH DISTANCE [mm x 10]
Setting the digit for tens:
0
D
2 4 6 8
1 3 5 7 9
NOTCH DISTANCE [mm x 1]
Setting the digit for units:
0
D
2 4 6 8
1 3 5 7 9
NOTES:
For example, to set the notch distance to 15 mm, modify the parameters as follows:
Notch Distance Sign = +
Notch Distance [mm x 10] = 1
Notch Distance [mm x 1] = 5
If the “Notch Alignment” parameter is disabled, the parameters for the “Notch Distance” are not printed.
In setup mode, it is possible to set the notch distance using a values range from -5 mm to 32 mm.
CURRENT Setting of the current consumption:
Low
High
Normal
D
58