Custom Audio Electronics VK80, Руководство пользователя

Страница: 107 / 116

13.4 Embedded Web Server: functions
The “Printer Settings” section is a restricted one. To enter the section, it is required the identiication of the user and pass
-
word. With the tools of this section, it is possible to set up the same parameters of the device that are conigurable in the
device’s setup mode (see chapter 6).
The following igure shows the page for the “Printer Settings” and it is divided into 4 areas:
1. SECTIONS Are the same as described on the main page.
2. REAL TIME STATUS
Reports a list of operating parameters controlled and monitored in real time.
3. PARAMETERS
Reports the list of the conigurable parameters of
device.
4. TOOLS
The modiications are applied by pressing the button “Apply Printer Settings”. To reintro
-
duce the values previous the modify press the button “Reset Printer Settings”.
< DEVICE NAME > - Ethernet Interface
http:// < IP Address >
USER : < username >
Device Info Printer Settings Network Setup E-mail Setup Printer Support Login...
< DEVICE NAME > Printer Settings
Auto Feed:
PrintMode:
Char / Inch:
Speed / Quality:
Paper Width:
Notch Alignment:
Current:
Total Cut:
Buffer Clear At Paper End:
PowerFail WakeUp Mode:
Print Density:
CR disabled
Normal
A=15 B=20cpi
Normal
76mm [80PaperWidth
Notch Distance [mm]:
0.0
Enabled
Notch Threshold: 50%
Normal
Enabled
Disabled
LASR PWR State
0 %
Notch Autosetting:
Enable
Paper Characterization:
Enable
Apply Printer Settings Reset Printer Settings...
RealTime Status
Cover Open
Paper End
Near Paper End
Paper rolling
Autoload Paper
LF key pressed
Over temperature Error
Supply Voltage error
Cutter error
OnOff Key Pressed
Paper Jam
Notch Position Error
Notch Position OK
2
3
1
4
NOTE:
To know the IP address of the device, print the setup report of the device (see chapter 5) or use software LOCATOR.
107