Curtiss-Wright DTI-VME/S Скачать руководство пользователя | Manualshive

Страница: 10 / 80

background image

OVERVIEW

1.3 Enhanced Bus Connection Capability

Internal and external termination, transformer or direct coupling, and connected or isolated
buses are supported by the DTI-VME/S. Bus connection is enabled via a software-accessible
control register (Bus Connection Relay Control Register).

1.4 DTI-VME/S Onboard Dual-Port RAM

The DTI-VME/S provides up to 64K words of dual-port RAM for maximum processing
throughput. The highly flexible RAM area allows you to alter the size of the RAM to
enhance data handling, alter the configuration to meet specific requirements and change the
starting location of the dual-port RAM to provide more effective application compatibility.
These options are enabled via Configuration Registers 26, 27 and 28. (See Getting Started
for details.)

The dual-port RAM is accessible directly from the VME bus or from the DTI-VME/S. All
accesses to the dual-port RAM must be in 16-bit word transfers.

1.5 Remote Terminal Mode

The RT mode provides the capability of emulating an RT, with up to 31 data subaddresses
and one or two mode subaddresses. (Subaddress 31 is selectable.) The DTI-VME/S responds
to bus instructions in real-time, easily handling the traffic of a 100 percent loaded bus.

Using the 64K-word dual-port RAM, the DTI-VME/S receives, stores, time tags and counts
over 2,000 32-data word transfers. Bus messages are transmitted and received without host
intervention. As each valid bus message is received, an RT index counts the number if
storage buffers. If the buffers for a particular subaddress are full, only the last message buffer
is overwritten.

Other RT features include:

•

Generating an interrupt when addressed

•

Providing a 64 microsecond resolution time tag for each stored message

•

Detecting message errors

•

Enabling specific subaddress/mode codes

1.6 Bus Controller Mode

The BC mode provides the capability of defining, storing and implementing multiple lists of
bus instructions. Controlled by the application, Crutiss-Wright’s inter-message timing allows
the BC to emulate the instruction set and bus command timing without host intervention.
The instructions allow the specification of an inter-message timer to delay the
implementation of the subsequent instructions.

The DTI-VME/S addresses up to 32 RTs, with up to 32 subaddresses each. Each Command
Block instruction, size of the instruction and method of implementation is definable.

The DTI-VME/S BC is also capable of:

•

Monitoring data during RT-to-RT transfers.

•

Controlling the bus retry option;, which allows the BC to re-send bus instructions on
the same or opposite bus up to four times.

•

Polling RT status.

Copyright 2004

1-2

DTI-VME/S

«
...
8
9
10
11
12
...
»

Содержание DTI-VME/S

















































































Отзывы:

Нет отзывов

Похожие инструкции для DTI-VME/S

RocketLink-G 3088/I

Бренд: Patton electronics Страницы: 61

CompactPCI CC8-BLUES

Бренд: EKF Electronik Страницы: 52

Бренд: Dantel Страницы: 62

Бренд: ICP DAS USA Страницы: 8

Бренд: Cytron Technologies Страницы: 13

Бренд: AMD Страницы: 45

Бренд: Xyclop Страницы: 144

Бренд: Silvertel Страницы: 9

EK-FC750 GTX Series

Бренд: ekwb Страницы: 2

Бренд: ICOP Technology Страницы: 42

Бренд: Lanpro Страницы: 3

Бренд: Lefroy Brooks Страницы: 10

ExpressCard 11-in-1 Reader/Writer

Бренд: SIIG Страницы: 8

Бренд: ZALMAN Страницы: 9

BreezeNET DS.11 Configuration Utility

Бренд: Alvarion Страницы: 2

com.tom INDUSTRY 100.WLAN.W

Бренд: Beck Страницы: 2

Бренд: IBASE Technology Страницы: 49

Бренд: Allied Telesis Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды