manualshive.com logo in svg

Curtiss-Wright DTI-VME/S, Руководство пользователя

Поделиться
Скачать
Curtiss-Wright DTI-VME/S Скачать руководство пользователя страница 67

REMOTE TERMINAL  

 

Bit 12 

Reserved 

 

Bit 11 

Illegalize Broadcast Mode Code (with Data Word) 

 

If this bit is enabled, the RT does not accept a Broadcast Mode Code with Data Word sent to the 
RT.  If via the Standard Interrupt Enable Register (09), Illegal Broadcast Command Received 
events are enabled, this bit is set, the RT transacts this mode code with data and this bit equals 1, 
an Illegal Broadcast Command Received standard priority interrupt occurs.  (This interrupt sets 
the Broadcast Command Bit and Message Error Bit in the message status word and the status 
word, but does not send them onto the 1553 bus.) 

 

Bit 10 

Illegalize Transmit Mode Code (with Data Word) 

 

If this bit is enabled, the RT responds to a Transmit Mode Code with Data Word sent to its mode 
subaddress with the Message Error Bit set in the status and no data word.  If via the Standard 
Interrupt Enable Register (09), Illegal Command events are enabled, this bit is set and the RT 
transacts this mode code, an Illegal Command standard priority interrupt occurs.  (This interrupt 
also sets the Message Error Bit in the message status word.)  This bit notifies you of attempts to 
transact the broadcast mode code. 

 

Bit 9 

Illegalize Receive Mode Code (with Data Word) 

 

If this bit is enabled, the RT responds to a Receive Mode Code with Data Word sent to its mode 
subaddress with the Message Error Bit set in the status.  When this bit is enabled, a bus message 
has been sent to an illegal mode code with data in the receive direction.  If, via the Standard 
Interrupt Enable Register (09), Illegal Command events are enabled, this bit is set, an Illegal 
Command standard priority interrupt occurs when the RT transacts this mode code with data (and 
also sets the Message Error Bit in the message status word).  Mode codes may also be validated 
using this bit. 

 

Bit 8 

Interrupt When Mode Code (with Data Word) is Transacted 

 

This bit allows an interrupt to be generated when this mode code with data is transacted.  When 
the RT transacts this mode code with data a Subaddress Event Interrupt occurs.  Enabling this bit, 
makes monitoring activity to/from a specific subaddress easy. 

 

Bit 7 

Interrupt When Index is Equal to Zero 

 

Used in conjunction with Bits 6 through 0 to define a Subaddress Event Interrupt event.  When 
Bits 6 through 0 change from 1 to 0 and Bit 7 equals 1, a Subaddress Event Interrupt occurs.  The 
host is notified when all message buffers of a particular mode code with data block fill up, 
maximizing the integrity of stored data. 

 

Bits 6-0 

Index 

 

The maximum number of messages stored per mode code with data before overwriting occurs is 
128.  The initial value per mode code with data is user-definable up to 128.  When a message is 
stored to a mode code with data block, the particular index is decremented by 1.  This index is 
not decremented if an invalid command is received or if the index field equals 0. 

6.3.2  Message Status Pointer 

 

The Message Status Pointer links RT status information to each mode code with data word 
message.  This 16-bit onboard RAM pointer specifies the location of the RT status information. 

 
Bit 15 

Subsystem Failure 

 

This bit indicates that the SSYSF (subsystem failure) signal was asserted just before the status 
word transferred to memory.  This signal corresponds to Pin 2 of the external port. 

 
Bit 14 

Broadcast Message 

 

This bit indicates that the broadcast message was received at this subaddress. 

 

Copyright 2004 

6-7 

DTI-VME/S 

 

Содержание DTI-VME/S

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды