Curtis Dyna-Fog TWISTER XL 3 3950, Инструкция по установке, эксплуатации и техническому обслуживанию

Страница: 16 / 61

16
4. Wipe dirt from the air cleaner body and cover, using a moist rag. Be careful to
prevent dirt from entering the carburetor.
Oil Level Check
Check the engine oil level before each use, or every 10 hours if operated continuously.
Check the engine oil level with the engine stopped and in a level position.
1. Remove the oil filler
cap/dipstick and wipe it clean.
2. Insert and remove the oil filler
cap/dipstick without screwing it
into the oil filler neck, then
remove it to check the oil level
shown on the dipstick.
3. If the oil level is near or below
the lower limit mark on the
dipstick, fill to the bottom edge
of the oil fill hole with the oil.
To avoid overfilling or under
filling, be sure the engine is in
a level position, as shown,
while adding oil.
4. Reinstall the oil filler cap/dipstick and tighten securely.