Cuchen CRT-RPK067 Series, Руководство пользователя

Страница: 13 / 50

13
How to Detach or Attach the Pressure Packing
• The packing does not come off easily to prevent steam from leaking, but it can be removed by holding it with your hand and
pulling it with force. If necessary, you can remove it and clean it.
• The packing is a consumable item. If steam is leaking, remove the packing and clean it, and check it after inserting the packing
in the following way. If steam still leaks after that, please purchase a packing from the dealer or customer center and replace it.
• It is recommended to replace the pressure packing periodically since its life span is about �-� years depending on the number
of uses. (Pressure packing is made of silicon)
1
Grab the clean cover handle and
pull it in the direction of the arrow to
remove the clean cover equipped
with the pressure packing, then pull
the pressure packing as shown in
the figure to remove it.
2
When installing the pressure packing on the outside
of the clean cover, insert the groove of the packing
into the clean cover from the outer part ➀, and then
install the pressure packing by turning it one round
in the direction ➁
3
Insert the pressure packing making sure that it does
not come off.
Before Use
The outer packing of the clean cover is installed without
distinguishing between the front and the rear.