CUBICON Single Plus
User Manual
5
1.
Product introduction
Thank you for purchasing CUBICON Single Plus.
CUBICON Single Plus is one of the 3D printers of FFF type and easy to use and made in consideration of
clients’ convenience comparing to other general FFF type.
CUBICON Single Plus features include below.
•
The printer case is made with flame resisting material and is relatively safe from fire. Stylish design of
the printer came from exclusive painting.
•
Detachable extruder replacement allows various material use. Therefore, filament of various material
can be used.
•
Gas and micro-dust are effectively removed using triple filter the first time in Korea.
•
More advanced Auto Level of the printer is unveiled by taking over Auto Level Plus of CUBICON
Single.
•
Printout is possible and output takeout is easy without commonly used special adhesive taping work
by Specially laminated bed
•
Touch color LCD use along with immediate printing stop and pause is possible by 32Bit application
•
Inside memory application allows outside memory separation after printing start. Therefore, private
USB memory is not required anymore.
•
One button is enough to check the printer problem by diagnosis function.
•
600 W high capacity power application allows safe printout and fast warm-up.
•
The printer immediately enters into pause mode by filament detectable sensor application in the case
of unwanted Filament decrement.
This user manual explains all process, from the printer installation to sample model printing step by step. Those users,
who have already tried special technology of CUBICON 3D printer series, are also recommended to read this user
manual carefully.
Experience new 3D printing with CUBICON Single Plus
