CUBICON Single Plus
User Manual
35
[1] Continue
Connects and prints paused files from paused point.
[2] Stop
Stops printing (Pup-up is activated after FW1.1)
[3] Heating
Controls current temperature
[4] Filament
Enters the filament loading / unloading
Main > Heating
[1] Nozzle
Nozzle temperature
[2] Bed
Bed temperature
[3] Room
Inside printer temperature
[4] Fan
Controls shaped fan wind power
[5] +
Increase selected number
[6] -
Decrease selected number
[7] Cool Down
Initializes all temperature setting value
[8] ABS
Warms up basic setting temperature of ABS
[9] PLA
Warms up basic setting temperature of PLA
[10] TPU
Warms up basic setting temperature of TPU
[11] USER
Warms up user setting temperature. Basic temperature is 0°C
