Cube Road bike, Руководство пользователя

Страница: 25 / 48

ADjustINg AND usINg yOuR BIKE ROAD BIKE | EN | 25
instructions and/or consult your dealer.
On derailleur systems the gear is shift-
ed by switching the chain to anoth-
er sprocket. On the crank set these
sprockets are called “chain rings” and
on the rear sprocket cassette they are
called “pinions”.
Insert Shimano illustration!
3. Please observe the chain position prescribed
as shown above.
S
To be avoided: Largest chain ring + largest
pinion
S
Smallest chain ring + smallest pinion
The left-hand lever operates the chain
ring derailleur and the right-hand lever
operates the gear shift.
DANgER Of MAtERIAl DAMAgE!
Incorrect operation of the gear shift le-
vers can damage your gears.
Never operate both levers or both gear
shift switches at the same time!
Please note that for the crank set (left-
hand lever) and hub gears: Never shift
under load!
7.4.1 shimano Rapidfire/ shimano
Rapidfire 2-Way-Release/
shimano EZ fire
On your gear-shift there are two levers. Lever A is
for shifting to a larger chain ring or sprocket and
Lever B for shifting to a smaller one.
Rapidfire 2-way 1, Lever A (arrow to lever)
Rapidfire 2-way 5, Lever B (arrow to lever)
1. Here is how you shift to a larger sprocket:
S In order to shift you must be pedalling.
S
Press the lever down with your thumb
beyond the first stop and keep it
depressed until the desired gear is
selected.
Rapidfire 2-way 2, (arrow in direction of operation)
S
For rapid shifting through several
sprockets press the lever right down and
keep it depressed until the desired gear
is selected.
Shimano STI
chain rings
sprocket