Cube Road bike, Руководство пользователя, Страница: 40 / 48

40 | ROAD BIKE | EN
mtb094
2. Shift the chain to the smallest sprocket on
the rear wheel cassette (see Chapter 7.4 )
S
Raise the rear of the bike, operate the
shift lever concerned and turn the crank
in the drive direction until the chain lies
correctly on the smallest sprocket.
Racing bike 079
3. On front wheel with hub dynamo (if fitted):
S
Remove the push-fit connector between
the dynamo and cable.
4. Loosen the wheel hubs.
S Open the quick release on your road
wheel (see also Chapter 7.6 Quick
Releases)
S Turn the locknut enough to allow
sufficient room on the axle.
With other types of clamping.
S
Loosen the clamp as per the
accompanying component instruction.
5. Remove the wheels from the frame and forks.
S
Front wheel: Lift the bike up by the
handlebars and withdraw the wheel from
the front fork dropouts.
S
Rear wheel: Lift the bike up slightly at
the back and press the gear mechanism
backwards. In this position push the rear
wheel gently in the direction of the
dropout openings.
Racing bike 082 (arrow in direction of turn)renn-
rad084
6. After removing place the bike carefully on its
left hand side.
DANgER Of MAtERIAl DAMAgE!
With no rear wheel the frame and/or the
gear mechanism can become damaged.
After removing the rear wheel lie the
bike on its left side or use a suitable
assembly stand.
7. To fit your wheels. Fit the rear wheel first.
8. a) Inserting the rear wheel:
S
Lift up the bike rear,
S
placing the rear wheel under it so that
the chain is over the smallest sprocket.