Cube Road bike, Руководство пользователя

Страница: 24 / 48

24 | ROAD BIKE | EN
mtb033 (arrows)
racingbike032 (arrows)
S Move the saddle to the desired position.
S On saddle clamps with one bolt: Re-
tighten the clamp bolt to a torque of
8– 10 nm. When tightening please ensure
that all loosened parts are positively
interlocked.
S
On saddle clamps with two bolts turn
these alternately by one quarter to half
a turn until the prescribed 5 – 6 nm
torque is reached
S
On many seat posts stems other
tightening torques are prescribed. This can
be read on the seat post. Please consult
your dealer.
7.3 Adjust saddle height
On a gripper clamp with bolt you need a hexagonal
socket and a torque wrench of the correct size.
For a quick-release clamp please see Chapter 7.6.
1. Loosen the clamp as described in Chapter 10.2.
2. Move the saddle and seat post to the desired
position. Please note the instructions regarding
seat post insertion distance in Chapter 10.2.
3. Clamp the seat post as described in Chapter
10.2.
7.4 using the gears
Racing bike 036, Shimano STI
Racing bike 043, Campagnolo Ergopower
Racing bike 050 Sram force
1. Please determine on the basis of the
illustrations, which gear shift system your bike
has. If you are not sure which one it is please
consult your dealer.
2. If your gear shift lever is not shown in
the illustrations please take this from the
accompanying gear shift lever manufacturer’s
Sram
Campagnolo Ergopower
Shimano STI