38
|
ROAD BIKE
|
EN
10.1 fit and remove wheels
RIsK Of PERsONAl INjuRy AND
MAtERIAl DAMAgE!
Incorrectly fitted wheels can lead to
dangerous riding situations, falling, acci-
dents and material damage.
S
You must have your dealer dem-
onstrate fitting and removing your
wheels.
S
Practice this job at least once under
his supervision and control.
S
Only remove and fit the wheels if
you are sure you have mastered
this job.
DANgER Of MAtERIAl DAMAgE!
Hydraulic brakes must under no circum-
stances be operated after removing the
wheel!
If your bike has a disk brake use the
mandatory transportation wedges sup-
plied for that purpose for transportation
following removal of the wheel.
Remove these immediately prior to refit-
ting the wheels.
Please comply with the accompanying
component instructions here.
RIsK Of PERsONAl INjuRy AND
MAtERIAl DAMAgE!
Rim brakes only:
When fitting and removing the brake
blocks can get twisted.
S
When fitting the wheels please note
that the brake blocks are correctly
positioned (see Chapter 6.8).
S
If these are not correctly positions
please contact a specialist work-
shop.
For transportation you may remove and later
replace the wheels on your bike if these are fitted
with quick releases.
If your bike has rim brakes please note
that you do not change the position
of the brake blocks with the tyre. This
could happen especially in the case of
large-volume tyres. If the tyre do not
easily pass easily between the brake
caliper blocks let a sufficient amount of
air out of them. Then inflate the tyres
afterwards to the correct pressure.
To remove your wheels. First remove the front
wheel:
1. Open rim brake.
On racing bike brakes:
a) Shimano und Sram:
S
Move the lever upwards.
Racing bike 076 (arrow to lever)
Racing bike 077 (arrow to lever)
Содержание Road bike
Страница 1: ...Handbook Road bike English...