Getting Started
Charger
Please use the charger that is provided, which is direct current
14–18 volts. Input current is 100–250 volts AC.
Battery Charging
The tool uses six-AA rechargeable lithium batteries. When the
Low Bat
light is lit, recharge the tool for 2.5–3.5 hours. During
charging, the
Charge
light will be lit. When charging is complete,
the light will automatically turn off. Disconnect the charger when
charging is finished.
Caution
The batteries may become hot during charging. Do not charge near
or around open flames or in places with high temperature.
On/Off
To turn the tool on, press
I/0
for two seconds and the screen will
display the welcome message. After operating the tool, press
I/0
for two seconds to turn the tool off. When no operations are being
performed, the tool will automatically shut off in two minutes.
Section 3: Getting Started
6
800-445-0179
©2008 TR
