The screen shown here will be
displayed while programming.
When the screen shown below to the
right appears and two beep tones
are heard, the process has been
performed successfully.
To double check if this is indeed what
you need, press
Esc
to go back to
the operation menu and scan the
sensor again. Check the ID numbers
and relative information to see if the
ID is correct. If not, repeat
process previously explained
on page 10.
Detailed instructions for the Copy Sensor Input ID (2b)
continued next page.
Section 5: Programming Function Menu
©2008 TR
800-445-0179
15
