Caution
Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void
the user’s authority to operate the device.
To comply with FCC RF exposure compliance requirements, this device
and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
Scope of Use and Warnings
This PUR-TPMS Sensor is a sensing device designed to measure and
display tire operation and/or to alert the driver when air pressure and
temperature irregularities are detected. It is the responsibility of the driver
to react promptly. Abnormal tire inflation pressure should be corrected at
the earliest time possible.
System Installation and Usage
Programming the sensor requires a qualified technician who has been
trained to operate the PUR-TPMS Scan Tool. The sensor can be
programmed only with the PUR-TPMS Scan Tool. It cannot be
programmed with any other tools.
Installation of the sensor onto the wheel must be done by professional
technicians who have been trained to install TPMS sensors.
Reacting to Alerts
When an alert or warning is displayed or sounded, reduce vehicle’s
speed and proceed slowly to a safe location to have the tire inspected
and serviced.
The low/high pressure alert indicates the tire pressure is not within the
factory’s set limits and the high temperature alert indicates that the tire’s
temperature has surpassed the factory’s set limits.
Use of Chemicals
During tire inflation, any use of internal sealants and propellants may
affect the operation of the sensor/transmitter. The use of such chemicals
is not recommended and the product’s warranty will be void if the sensor
comes in contact with them.
Section 1: Introduction
4
800-445-0179
©2008 TR
