3. Program Sensor
Put the sensor at the top of the tool
for further programming steps. Select
Program Sensor
by pressing
Enter
and you will see Screen 1.
If the sensor is successfully
programmed, you will see Screen 2
and hear two beep tones.
After the programming process is
done, fit CUB’s new sensors into
the wheels and you can perform the
vehicle’s sensor registration procedure.
Refer to the vehicle’s owner’s manual
for the registration procedure.
Important Notice:
During programming and resetting, keep
other sensors at least 15 feet away from
each other to eliminate any interference.
Screen 1
Screen 2
Section 5: Programming Function Menu
©2008 TR
800-445-0179
17
