CTS MCT-RACK-12-MGM, Руководство пользователя

Страница: 19 / 103

19
2.5.7 Show Command
The “show” command is very important for network administrators to get information about
the device, receive outputs to verify a command’s configurations or troubleshoot a network
configuration error. It can be used in Privileged or Configuration mode. The following
describes different uses of “show” command.
1. Display system information
Enter “show switch-info” command in Privileged or Configuration mode, and then the
following information will appear.
Company Name: Display a company name for this CHASSIS
. Use “switch-info company-
name [company-
name]” command to edit this field.
System Object ID:
Display the predefined System OID.
System Contact:
Display contact information for this CHASSIS
. Use “switch-info sys-
contact [sys-
contact]” command to edit this field.
System Name:
Display a descriptive system name for this CHASSIS.
Use “switch-info sys-
name [sys-
name]” command to edit this field.
System Location:
Display a brief location description for this CHASSIS
. Use “switch-info
sys-location [sys-
location]” command to edit this field.
Model Name:
Display the product
’s model name.
Host Name:
Display the product
’s host name.
DHCP Vendor ID: Display the product
’s DHCP Vendor ID.
Firmware Version1:
Display the firmware version 1 (image-1) used in this device.
Firmware Version2: Display the firmware version 2 (image-2) used in this device.
M/B Version: Display the main board version.
Serial Number: Display the serial number of this CHASSIS.
Up Time: Display the up time since last restarting.
Local Time: Display local time.
Current Run In: Display the current running firmware image.
Reboot Run To: Display the firmware image which will run after next restarting.
Fan State: Display the status of case fans.