CTS MCT-RACK-12-MGM, Руководство пользователя

Страница: 10 / 103

10
2. Command Line Interface (CLI)
This chapter describes how to use your CHASSIS Console Program, specifically in:

Local Console Management (out-of-band)

Telnet Management (in-band)

Configuring the system

Resetting the system
The interface and options are mostly the same in both Local Console and Telnet
Management. The only difference is the type of connection and the port that are used to
manage the CHASSIS.
2.1 Local Console Management
Local Console Management is always done through the RS-232 (RJ-45) port and requires a
direct connection between the CHASSIS and a PC. This type of management is very useful
especially when the network is down and the CHASSIS cannot be reached by any other
means.
You also need to use the Local Console Management to set up the CHASSIS network
configuration for the first time. You can set up the IP address and change the default
configuration to the desired setting to enable Telnet or SNMP.
Follow these steps to begin a management session using Local Console Management:
1. Attach the serial cable to the console RJ-45 port located at the front of the CHASSIS
with a null modem.
2. Attach the other end to the serial port of a PC or workstation.
3. Run a terminal emulation program using the following settings:

Emulation VT-100/ANSI compatible

BPS 9600

Data bits 8

Parity None

Stop bits 1

Flow Control None

Enable Terminal keys
4. Press Enter to reach the Main menu.