EN
Logika - use and maintenance guide
3/16
page
The machine described in this user and maintenance guide is an automatic, multifunctional
digital-setting system for operation with vehicle air conditioning (A/C) plants with functions
for gas recovery, used oil discharge, vacuum, leakage control, oil injection and gas
injection, all managed by a microprocessor and an electronic precision scale.
Do not use the machine for any purpose other than which it was designed.
In the case of demolition or hauling away, check the legislation codes that are
applicable in your Country (note that the machine contains refrigerant fluids and
we therefore recommend demolition by specialised operators).
The machine is supplied with two distinct models for two types of refrigerant.
Do not use the same model for both types of fluids.
1. Introduction
•
Electronic management system
: it allows the whole process to be administered through
a microprocessor.
•
Electronic precision scale for weighing of gas
: it can weigh up to a maximum of 10 Kg.
of refrigerant with a margin of error of 10 grams and is programmed to interrupt the
RECOVERY and CHARGING functions if pre-set for this purpose or should the quantity of
gas exceed the set limits.
•
Electronic precision scale for weighing of oil injection
: it can weigh up to a
maximum of 500 grams with a margin of error of 10 gr.
•
Compressor for refrigerant gas recovery
.
•
Anti-acid and dehydration filters
(n. 3) with hight absorption capacity of water
guaranteeing excellent autonomy.
•
Infeed gas still
with automatic regulation of refrigerant flow and separated oil coming
from the A/C system with discharge of oil coming from the same.
•
Oil separator
: positioned immediately after the compressor with automatic oil return at
the end of the cycle.
•
Cylinder for refrigerant gas recovery
, equipped with an electronically controlled
thermostatic resistor and discharge of incondensable gases.
•
Two-stage high-performance vacuum pump
.
•
Control panel
with digital commands.
•
Analogic pressure gauges
.
•
Refrigerant service valve (Ref. Service)
: allows refrigerant contained in the internal
cylinder of the unit to be sent to a suitable outside container for the purpose.
•
Solenoid valve
for the discharge of the incondensable gas which are in the bottle.
•
Discharge valve
for oil coming from the A/C system
.
•
High-performance flexible hoses
(n. 2) with rapid coupling and with manual opening
(screw mechanism) for R134a and R12.
•
Oil dosing devices
(n. 2) 500 cc.
Содержание Logika
Страница 1: ...LOGIKA USE AND MAINTENANCE GUIDE...
