Installation manual CHARGESTORM® Connected
page
11
6.5
RFID
In order to activate user authentication can RFID be used. RFID-configuration can either take place
from the portal (from a browser) or be configured on local web interface.
•
To activate RFID, navigate to
”
Configuration
→
Outlet
→
Authentication
”
and select
”RFID”
for
all outlets. This setting will require user to authenticate with RFID tag before charging starts.
Figure 15 Outlet in RFID-mode
•
It is possible in
”
Tag administration
”
to add and delete RFID-tags that shall be activated on
CHARGESTORM® Connected.
7
Product information
Power input
Power
16-32A, 230V, 1-phase or 16-32A, 400V, 3-phase, 50Hz. Power input
connector depends on model.
Charging current
16-32A
Supply Connection L1,L2,L3,N,PE. Cable area 2,5
–
16mm
2
.
(For IT-Nett: L1,L2,L3,PE Cable area 2,5
–
16mm
2.
. )
Fuses
C-characteristics. Type A. Breaking capacity 6kA. Nominal current 16 or
32A depending on model.
Mechanics
Weight
Less than 12kg (depends on model)
Dimension
Height: 395mm, Width: 278mm, Depth: 160mm
Material
Front and back cover in ABS plastic. Colored zinc oxide metal box for
electronics.
IP
44
Temperature
-25
°
C -
+
50
°
C
Interfaces
EV connector
1 or 2 outlets Type 2 or fixed cable of Type 1 or Type 2
