CTEK E-MOBILITY CHARGESTORM Connected, Руководство по установке, Страница: 8 / 15

Installation manual CHARGESTORM® Connected
page
8
192.168.7.2 to reach the web interface. The log in page is shown after entering the address. To log
in enter:
Username: ccu
Password: ccu
Figure 10 Log in page
6.2 Network settings
After successful log in, is the network settings found under Configuration
→
interfaces
When network configuration is ready check on the status page that internet access is established.
Ethernet
To set the IP settings for Ethernet follow the instruction below.
•
Under “ Configuration
→
Interface
→
General ” , select WAN= ” Wire ” .
•
Under “ Configuration
→
Interface
→
Wire ” , select “ DHCP ” or “ Static ” (for Static enter IP
address, netmask and gateway). For “DHCP” is IP address assigned automatically.
•
Push the “Save” button on the bottom of the page.
Figure 11 Ethernet configuration