CTC Union GW-732FW, Руководство пользователя

Страница: 2 / 86

ii
LEGAL
The information in this publication has been carefully checked and is believed to be entirely accurate at the
time of publication. Our company assumes no responsibility, however, for possible errors or omissions, or
for any consequences resulting from the use of the information contained herein. Our company reserves
the right to make changes in its products or product specifications with the intent to improve function or
design at any time and without notice and is not required to update this documentation to reflect such
changes.
Our company makes no warranty, representation, or guarantee regarding the suitability of its products for
any particular purpose, nor do we assume any liability arising out of the application or use of any product
and specifically disclaims any and all liability, including without limitation any consequential or incidental
damages.
Our products are not designed, intended, or authorized for use in systems or applications intended to
support or sustain life, or for any other application in which the failure of the product could create a
situation where personal injury or death may occur. Should the Buyer purchase or use our product for any
such unintended or unauthorized application, the Buyer shall indemnify and hold our company and its
officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages,
expenses, and reasonable attorney fees arising out of, either directly or indirectly, any claim of personal
injury or death that may be associated with such unintended or unauthorized use, even if such claim
alleges that our company was negligent regarding the design or manufacture of said product.
Federal Communications Commission (FCC) NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
�
Reorient of relocate the receiving antenna.
�
Increase the separation between the equipment and receiver.
�
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
�
Consult the dealer or an experienced radio / TV technician for help.
This unit was tested with shielded cables on the peripheral devices. Shielded cables must be used with
the unit to insure compliance. This statement can be deleted if unit was not tested with shielded cables.
The manufacture is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may cause undesired operation.
Change or modifications that are not expressly approved by the manufacturer could
void the user＇s
authority to operate the equipment.
CISPR PUB.22 Class B COMPLIANCE:
This device complies with EMC directive of the European Community and meets or exceeds the following
technical standard. EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics
of Information Technology Equipment. This device complies with CISPR Class B.
WARNING:
This is a Class B product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the European
Community. Such marking is indicative that this equipment meets or exceeds the following technical
standards: EN 55022:2006+A1:2007, Class A, EN55024:2010.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.