CTC Union GW-732FW Скачать руководство пользователя страница 43

Страница: 43 / 86

Dual Band Wireless VoIP Gateway

User’s Manual

2-3 Wireless Settings

2-3-1 Basic Settings

Wireless Settings

→

Basic Settings

Enable Wireless LAN Interface:

Enable wireless basic settings on LAN interface.

Wireless Network Name (SSID):

SSID is the name of your wireless network. All wireless-equipped

devices share the same SSID to communicate with each other. It must be unique to identify separated
wireless network. For security, you should change the default SSID to a special ID.

Wireless Channel:

Select a clear and appropriate channel for your wireless network. A device on your

wireless network must use a specific channel to transmit and receive data. If wireless network has overlap,
change a different channel number.

802.11 Mode:

The VoIP Gateway can operate in 2.4GHz ISM band with different speed of wireless

connection, Select the wireless band of your network.

802.11b only -

Allow all 802.11b compliant wireless devices to associate with the wireless AP.

802.11g only -

Allow all 802.11g compliant wireless devices to associate with the wireless AP.

802.11n only -

Allow all 802.11n compliant wireless devices to associate with the wireless AP.

Mixed 802.11g and 802.11b -

Allow a mix of both IEEE802.11g and 802.11b compliant wireless

devices to associate with the wireless AP.

Mixed 802.11n and 802.11g -

Allow a mix of both IEEE802.11n and 802.11g compliant wireless

devices to associate with the wireless AP.

Mixed 802.11n, 802.11g and 802.11b -

Allow a mix of both IEEE802.11n, 802.11g and 802.11b

compliant wireless devices to associate with the wireless AP.

Mode:

The VoIP Gateway has ability to serve as four operating modes in wireless network separately.

AP:

As a wireless AP that allows wireless-equipped stations to communicate with a wired network and

the other wireless network for Internet access and resources sharing.

Channel Width:

Wireless channel width for 802.11n. Select 40 MH for higher speed.

Broadcast SSID:

Broad AP

’s SSID for convent usage. To hid SSID for more security.

Enable WMM:

Wi-Fi Multimedia. It provides higher priority for multimedia stream to get better quality.

Содержание GW-732FW























































































Результаты поиска

Содержание GW-732FW

Отзывы:

Похожие инструкции для GW-732FW

Бренды по названию

Популярные бренды

CTC Union GW-732FW, Руководство пользователя

Результаты поиска

Содержание GW-732FW

Отзывы:

Похожие инструкции для GW-732FW

Бренды по названию

Популярные бренды