CTC Union EcoZenith i555 Pro 1x230V Скачать руководство пользователя страница 13

Страница: 13 / 168

CTC EcoZenith i555 Pro

Upper tank

Lower tank

port 1

port 2

2.3

Heat pump

The EcoZenith is designed with two parts in order to ensure the heat pump

operates to maximum possible economy.

The heat pump is connected via two 3-way valves to the EcoZenith and

ensures that the heat is directed into the upper and lower tanks, respectively.

For instance, when the heat pump pumps towards the upper tank, the 3-way

valves send the fl ow to the two uppermost connections, so that the fl ow

enters port 1 and exits through port 2.

The heat pump operates in two different ways, depending on whether it is the

upper tank or the lower tank being charged.

2.3.1

Upper tank

The fi nal hot water heating takes place in the upper tank. This means that, with

a high upper tank temperature, an ample DHW supply is obtained.

The upper tank has a factory-set stop temperature of 55°C, which means

that the heat pump will work to achieve this temperature in the upper tank.

When DHW is being drawn off and the temperature in the upper tank falls

to 5°C below the stop temperature, the heat pump starts up and raises the

temperature towards the set stop temperature.

The stop temperature can be adapted to DHW needs and to the heat pump

model installed.

When there is also a need for heat in the house, the 3-way valves will

automatically reverse direction and the heat pump continues to heat the

lower tank as soon as the stop temperature 55°C in the upper tank has been

reached. If the upper tank has not reached the stop temperature 55 °C within

the factory-set charging period of 20 minutes, the 3-way valves reverse the

direction and the heat pump charges the lower tank. This is to prevent loss of

temperature in the heating circuit.

Also refer to the "Upper tank" section in the "Detailed Menu Descriptions"

chapter (Installer/Settings/Upper Tank).

Pressure/level switch

In some cases, extra protection is required due to local requirements or

provisions. For example, the requirement in some areas is for the system to be

installed within a water catchment area. The pressure/level switch connects to

terminal blocks K22/K23/K24/K25 and is then defi ned in the "Installer/Defi ne/

Def. Heat Pump" menu. If there is a leak, the compressor and brine pump stop

and the "Flow/level switch" alarm appears on the display.

Содержание EcoZenith i555 Pro 1x230V









































































































































































Результаты поиска

Содержание EcoZenith i555 Pro 1x230V

Отзывы:

Бренды по названию

Популярные бренды

CTC Union EcoZenith i555 Pro 1x230V, Руководство по установке и обслуживанию

Результаты поиска

Содержание EcoZenith i555 Pro 1x230V

Отзывы:

Бренды по названию

Популярные бренды