CTC Union 6212576, Руководство по установке и обслуживанию

Страница: 19 / 44

19
CTC EcoLogic S
3.3.1.2 Remote control
For external control, the Normally Open (NO) or Normally
Closed (NC) mode is determined first for the external
control signal. This is setting is applied in the "Installer /
Define / Remote Control" menu.
Refer to the "Installer / Define / Remote Control" chapter
for more information on how the remote control function
works.
Ext. control temp °C 30 (30...60)
Select the temperature for the external heating tank for
remote control.
This menu bar is displayed if external control is active
(has been defined).
Ext. control temp DHW °C 30 (30...60)
Select the temperature for the external DHW tank for
remote control.
This menu bar is displayed if external control is active
(has been defined).
Other settings in the menu apply when external control
is not active.
Menu: "Installer / Settings / Heating Circuit" for remote control
of external heating or DHW tank.
Menu: "Installer / Settings / Heating Circuit" for remote control
of external DHW tank.
Adjustment °C 0 (-20...20)
Adjustment means that the temperature level can be
raised or lowered at a specific outdoor temperature.
HP max DHW No (No/Yes)
Specify whether the charging temperature should be
raised to 60 °C every fourth time the compressor starts.
HP max DHW can only be selected when external
control is not active.