CST DLE Скачать руководство пользователя страница 44

Страница: 44 / 69

INSTRUCTION MANUAL Digital Light Engraver

Operation and Cleaning

Effective date

30.09.2013

6.2.6

EMERGENCY STOP

The machine and equipment are equipped with an EMERGENCY STOP
switches so that the machine and equipment can be shut down quickly to
prevent any danger to people, machine and equipment.

The controller is designed in such a way that when an EMERGENCY
STOP is made all rotating or linear movements are shut down.

6.2.7

Action to be taken after an EMERGENCY STOP

Danger

Serious or even fatal injury can occur due to hot parts and hazardous
voltage!

Serious or even fatal injury can occur when continuing to work on the ma-
chine and equipment after an EMERGENCY STOP!

•

Do not work on the machine or equipment when it is switched on

•

All mechanical and electrical work is to be always performed with power

supply switched off (turn off the main switch and secure it with a padlock
or U-lock)

•

After an EMERGENCY STOP, check the machine and equipment for the

presence of residual voltage. The machine and equipment are not neces-
sarily isolated.

•

Wear appropriate protective equipment (e.g. gloves, safety shoes, hard

hat, etc.), and especially tight fitting clothes

•

Access to the machine and equipment must only be via the approved ar-

eas.

•

Before undertaking any work on the machine and equipment cordon off

the area with a temporary barrier (such as red and white safety chains)
and arrange for access to be restricted, if required.

•

Do not stand close to hot parts following an EMERGENCY STOP with the

machine and equipment.

•

Do not carry out any work alone on voltage-carrying parts and do not

leave the main switch unsecured after it has been turned off.

Resolve the cause that led to the EMERGENCY STOP and carry out the
following action:

•

Unlock the EMERGENCY STOP devices.

•

For example, to unlock EMERGENCY STOP button, simply pull out the

“mushroom head” button and let it go back in again

•

Return the protective devices to their original state

•

Use the control system to acknowledge the alarm message (error) that is

displayed

CST GmbH
Königsberger Straße 117
47809 Krefeld - Germany

Page 44 of 69

Betriebsanleitung DLE-AF 01.0 engl.docx

Содержание DLE






































































Результаты поиска

Содержание DLE

Отзывы:

Похожие инструкции для DLE

Бренды по названию

Популярные бренды

CST DLE, Инструкция по эксплуатации

Результаты поиска

Содержание DLE

Отзывы:

Похожие инструкции для DLE

Бренды по названию

Популярные бренды