CSrental B500, Руководство пользователя

Страница: 9 / 20

The B 500 Professional offers you the possibility of
changing the factory settings and making various set-
tings to meet your requirements.
Please proceed as follows:
1. Press the
„PROG” button on the remote control unit
„Prog“.
2.
The number „10“ will appear on the control panel
display.
3. Select one of the main menus (10, 20, or 30, see
table below).
4. Once your have reached the main menu you are
looking for, press the „SET” button to reach the re-
quired sub-menu, e.g. 11, 12, or 13.
5. Once your have reached the sub-menu you are loo-
king for, after a few seconds the display will flash
with a number such as 00, 01, or 98. By pressing
the blue „Humidity“ button (%) you can increase
the figure with
‘+’ or decrease it with ‘-‘.
6. When you have made the necessary change, sim-
ply wait for about 10 seconds. After that the display
will jump back to the standard position (showing
relative humidity) and the changes will be saved.
m If no more settings have been made for 10
seconds the display will jump back to the s
tandard position (showing relative humidi-
ty). The programming process can be termi-
nated at any time by pressing the ON / OFF
button. Please note, however, that this will
result in the loss of all the changes that have
been made.
10 Hooter setting
11 Hooter active when tank 00 = OFF
empty 01 = ON 01
12 Hooter active when UV 00 = OFF Only at version with
lamp is defective 01 = ON UV-C-technology 01
13 Hooter active with external 00 = OFF With external sensor
water sensor alarm 01 = ON 01
14 Hooter active when tank 00 = OFF (Only in combination with automatic
content >=50 liters 01 = ON water supply) 01
15 Hooter active when no 00 = OFF
radio signal 01 = ON 01
20 Relay setting
21 Relay active when tank 00 = OFF Only necessary with connection to a
empty 01 = ON central air-conditioning system 00
22 Relay active when UV lamp 00 = OFF Only necessary with connection to a
is defective 01 = ON central air-conditioning system 00
23 Relay active with external 00 = OFF Only necessary with connection to a
water sensor alarm 01 = ON central air-conditioning system 00
24 Relay active when tank 00 = OFF Only necessary with connection to a
content >= 50 Litre 01 = ON central air-conditioning system 00
Main Sub-
menu menu Description Setting Comment Factory
setting
16. Menu programming