CSI Wireless GBX, Справочное руководство

Страница: 84 / 109

GBX Reference Manual
64
messages to the GPS receiver. Re-power the GBX to stop the
output of the $CRMSS message, or re-tune the GBX with the ‘n’
field set to zero.
5.3.2 Proprietary Commands
The following subsections describe the selection of CSI Wireless
proprietary NMEA 0183 formatted commands, and their responses.
5.3.2.1 Wipe Search Command ($PCSI,4)
The Wipe Search command instructs the GBX to erase all parameters
within the beacon almanac and to initiate a new Global Search to
identify the beacon signals available for a particular area. The
command has the following form:
$PCSI,4<CR><LF>
Response:
$PCSI,ACK,4
When this command has been issued in Manual Tune mode, the
receiver will initiate a new Global Search when commanded to
Automatic Tune mode. If the GBX is operating in its Automatic
Background Search mode, a new Global Search will begin immediately.
5.3.2.2 Reserved ($PCSI,5)
This proprietary $PCSI command has been reserved for factory use:
$PCSI,5<CR><LF>
Response:
$PCSI,ACK,5