CSI Wireless GBX, Справочное руководство

Страница: 70 / 109

GBX Reference Manual
50
The x field identifies the GPS message to be turned on or off, and may
be selected from {GGA, GLL, GSA, GSV, RMC, VTG, or ZDA}. The y
field is the activation status, where y = 1 for ON, and y = 0 for OFF.
The GBX-8M automatically stores all changes made for subsequent
power up.
4.4 GBX-8A Message Activation
The Ashtech G-8 8-channel GPS engine contained within the GBX-8A
uses one command to set the various NMEA messages output by the
receiver. This command has the following format:
$PASHS,NME,x,A,y<CR><LF>
The x field identifies the GPS message to be turned on or off, and may
be selected from {GGA, GLL, GSA, GSV, RMC, SAT, VTG, or ZDA}.
The y field is the activation status, where y = ON or y = OFF.
After message output configuration, it is necessary to save all changes.
The following command will ensure that changes that you have made
are maintained after power is cycled:
$PASHS,SAV,Y<CR><LF>
4.5 GBX-12C Message Activation
The Canadian Marconi SuperStar 12-channel GPS engine contained
within the GBX-12C uses one command to set the various NMEA
messages output by the receiver. This command has the following
format:
$PMCAG,005,1,x,y<CR><LF>
The x field identifies the GPS message to be turned on or off, and may
be selected from {GGA, GLL, GSA, GSV, RMC, VTG, or ZDA}. The y
field is the activation status, where y = 001 (001= 1 second output