XLC 470
9
For further information please consult us at: www.comeval.es
Valves epoxy painted using FBT requires washers flat washers to be installed on the
flanges connections to prevent the paint from cracking or chipping.
Once the valve has reached the desired value set the locking nut and place the hood on top
of the pilot. Check manually acting on the pilot for the proper response of the valve -
30 cm
Make sure the pilot’s sensing port 5 is always in communication with the static pressure of
the tank and no air pockets or excessive bends and /or headloss (on the piping between
the static value and the pilot) are affecting such value
The unit flow control device GR.I.F.O. is exclusive from us and contains needle valves, filter
and check valves used for the proper valve’s stability and regulation. If present do never
change the settings before consulting with our technical support.
Valves epoxy painted FBT
Maintenance
CSA automatic control valves XLC 400 series have been designed with a sturdy and reliable
construction to minimize servicing and possible malfunctioning. However we recommend to inspect
them at least twice per year releasing the air accumulated inside the bonnet and checking the
strainer inside the GR.I.F.O, if present, or placed as a separate entity in the circuitry. We
recommend a thorough inspection and maintenance with complete disassembly every 4 years,
according to the following instructions.
