XLC 470
5
For further information please consult us at: www.comeval.es
Lifting the valve in the wrong way may cause malfunctioning, emission of water
spurts, injuries to the personnel and permanent damages of the valve.
Handling and storage
Lifting the valve improperly may damage it and the equipments around. It is mandatory not to
fasten the valve around the circuit, fittings, pipes, solenoids or position indicators. Valves must be
lifted only by cables, chains, located around the body, through the flanges holes or eyebolts.
During hoisting always consider that the center of mass depends on the circuitry and pilots
installed. If installation will be delayed place the valve indoors in a secure watertight storage.
Should that be unavailable use a vermin proof rain cover around the valve to keep off rain , mud ,
humidity. Place the valve on a solid and well drained surface base to prevent moisture, flood from
reaching the body.
