Crystal Vision
Card edge operation
SW808 User Manual R1.8
26
22/12/2008
5.3 Using ‘interactive’ mode
The interactive mode allows crosspoint assignments to be made individually.
To change crosspoint assignments immediately proceed as follows:
•
Set menu lever 4 (Set) DOWN
•
Set menu lever 1 (Load) DOWN to enable ‘immediate take mode’
•
Set the Input and Output Select switches for the desired connections
If necessary view the routing table to confirm that the required connections have been set.
Note:
Crosspoints only change state in the vertical interval if an external reference is supplied.
5.4 Using salvos
Salvos enable one or more crosspoints to be changed at once. Store crosspoints set with
the Input and Output Select switches with the 4
th
or ‘Set’ menu lever. The 1
st
menu lever
(Load) can now act as a ‘Fire Salvo’ function.
To build a salvo table proceed as follows:
•
Set the Input and Output Select switches for the first desired connection
•
Set menu lever 4 (Set) DOWN and UP to store that connection
•
Set the HEX switches for the next connection
•
Set menu lever 4 (Set) DOWN again to store that connection
•
Continue for all desired connections
•
When all the connections have been entered, set menu lever 1 (Load) DOWN
then UP to ‘fire’ the Salvo
If necessary view the routing table to confirm that the required connections have been set.
5.5 Saving and recalling presets
Unlike a Macro, a preset is a snapshot of the state of every crosspoint. Up to sixteen
presets can be saved and recalled at any time.
To save a snapshot of all crosspoint assignments as a preset, proceed as follows:
•
Select a preset using the output HEX switch (selections are 1 to 15, and 0 which
selects 16)
•
Set Preset/Macro menu lever 3 (MACRO) UP
•
Set menu lever 7 (Preset) DOWN
•
Set Preset/Macro menu lever 4 (Store) UP then DOWN
•
Set menu lever 7 (Preset) UP
•
Set Preset/Macro menu lever 3 (MACRO) DOWN