Crystal Vision
Statesman
SW803 3G User Manual R1.4
24
01/09/2016
Routing
The routing pane is divided into two sections – Routing and switch synchronisation, and
Output source.
Further status information is provided by the Statesman logging and alarms feature, which
is described in more detail in the Statesman manual.
SW803 3G’s routing menu
Input status and routing control
The 8 x 3 Router Control provides the input/output assignment. Routing is assigned by
pressing the button associated with the required input and output combination. On
pressing the selected routing button the button will turn brown to highlight that it has been
selected. Once all the required routing combinations have been entered press the Take
button to assign the new routing.
The eight simulated input present LEDs show which inputs have a valid video signal
connected to them.
Output switch timing
From this menu it is possible to set the output switching criteria from the selection of
Field, Frame or Immediate (crash). The timed switching points are in accordance with
RP168-2002 for all supported standards.
When timed switching is selected, and should the chosen reference source be removed the
switching mode will automatically change to immediate. It will be necessary to reselect
the switching mode manually once the reference source has returned.
Reference source
SW803 3G can obtain its timing source reference either from inputs 1 to 4, or take an
external analogue reference being either black and burst or tri-level syncs. The video
reference is reported unless the source is removed in which case an ‘Unknown’ status will
be reported.