Crystal Vision
Installation
Indigo 2 CoolFlow User Manual R1.3
27
20/06/2012
Details of signal types and pin-outs are given in the documentation supplied with each
Crystal Vision video or audio card.
The Indigo 2 frame rear view with EMC covers removed for slots 1 to 4
The rear modules are held in place by a retaining bar at each side. These run the height of
the frame and provide mechanical support as well as ensuring EMC compliance.
To access the rear connector motherboard the appropriate EMC covers and retaining
brackets must be removed.
Fitting rear connectors
To fit a rear connector, proceed as follows:
Disconnect the mains power leads from the frame
Remove the rear relevant EMC cover(s) at the rear of the frame by unscrewing
the adjacent retaining bars
Push fit the selected rear connector onto the appropriate frame slots
Refit full or half size EMC covers and replace the retaining bars
The Indigo 2 CoolFlow frame rear view with EMC covers fitted and RM01 connectors fitted to slots 1 and 2
If only a single slot remains uncovered, half size EMC covers are available.
The Indigo 2 CoolFlow frame showing the use of full and half size EMC covers and the use of single, double
and quad rear connectors
