background image

WARNING:

The  warranty  and  Underwriters’  Laboratory  and  CE  listings  for  the  coolers  are  invalidated  if 
any  alteration,  modification,  or  use  or  misuse  in  combination  with  any  other  machine  or 
devices  is  deemed  to  be  the  source  of  any  claim.  The  manufacturer  accepts  no  liability 
(including for bodily injury) resulting from any alteration, misuse, neglect, accidents, improper 
installations or repairs.

The Red Faucet dispenses hot water during normal operation that may cause severe burns.

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory  or  mental  capabilities,  or  lack  of  experience  and  knowledge,  unless  they  have  been 
given  supervision  or  instruction  concerning  use  of  the  appliance  by  a  person  responsible  for 
their safety.

Children should be supervised to ensure that they do not play with the appliance.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from 
the manufacturer or its service agent.

This marking indicates that this product should not be disposed with other household 
wastes  throughout  the  EU.  To  prevent  possible  harm  to  the  environment  or  human 
health  from  uncontrolled  waste  disposal,  recycle  it  responsibly  to  promote  the 
sustainable reuse of sustainable resources. To return your used device, please use the 
return  and  collection  systems  or  contact  the  retailer  where  the  product  was 
purchased. They can take this product for environmental safe recycling.

The  customer  acknowledges  that  water,  like  other  liquids,  can  cause  damage  to  surfaces.  The 
customer  takes  full  responsibility  for  placing  the  cooler  within  a  residence  or  business,  and 
acknowledges that failure to address drips, leaks or spillages is at the customer’s risk.

Environmental application temperature: 10~32°C.

The unit is rated IP10. (This unit is not protected against ingress of water)

For more information on this product, please visit 

www.crystalcoolers.com

Содержание Summit











Отзывы: