Crystal Mountain Summit, Руководство пользователя

Страница: 5 / 10

3. Use the fingertips of both hands to press downward on the Cone and turn counter clockwise
till it is free from the cooler opening. (Figure 18 and Figure 19) then remove the
TM
DryGuard (Figure 20).
4. Use fingers of both hands to lift up and remove the insulation jacket covering the reservoir,
from the cooler opening (Figure 21 and Figure 22).
5. Remove the baffle cup by lifting straight out (Figure 23). Loosen & remove the baffle stem
and wing nut by turning counterclockwise (Figure 24 and Figure 25).
6. Approach the cooler from the rear and open the latch provided on the evaporator band
(Figure 26).
7. Use both hands to loosen the reservoir from the evaporator band and lift is straight though
the cooler opening (Figure 27).
TM TM
Note: the DryGuard lid is standard on the Summit cooler. See the DryGuard section for
installation and removal instructions.
Figure 18 Figure 19 Figure 20
Figure 22
Figure 23
Figure 24
Figure 26 Figure 27
Figure 21
Figure 25
O
P
E
N
O
PE
N