Standup Series Bracket Installation Instructions
INSTALLATION
1.
Remove the two mounting screws that secure the Bottom Plate to the outer enclosure.
2.
While holding the "S" shaped bracket against the cooler (refer to diagram) reinstall and
tighten the bottom plate/outer enclosure screws securely.
3.
Place the cooler in position against the wall and using the "S" bracket, mark the location of
the wall insert holes to be drilled (if required). If not required, secure the cooler to the wall
using the two screws provided.
Figure 52
Screw
Condenser
Bottom Plate
"S" Mounting Bracket
