This document may not be reproduced, copied, transmitted or given to a party other than the end-user without the explicit
written authorization of Cryo Bio System.
IFU-000100 [Indice C] [SYMS I] [P.
17
/
18
]
6
MAINTENANCE
6.1 Precautions
Maintenance on the individual straw welding machine must be carried once the
machine has been powered down. In case of an accident, Cryo Bio System cannot
be held responsible.
6.2 Maintenance
The main mechanical and electrical parts of the welding machine do not require
any particular maintenance.
Repairs must be carried by a specialist, approved by Cryo Bio System.
However, it is recommended to regularly clean the welding jaws, particularly if they
got accidentally dirty when welding the straws.
If burn marks show on the PTFE bands, they need to be replaced (see composition).
6.3 Transport and storage
Disconnect the equipment from the mains.
To prevent damage, always store and transport the equipment and related parts
in their original packaging.
Store the equipment in a dry place.
When transporting the SYMS I, avoid shocks or brisk movements.
6.4 Recycling of worn parts
Please dispose of old equipment (transformer, electromagnet) at a
specialized center.
Separate the old pieces of equipment as per their composition: metal, plastic,
etc…
6.5 Non-responsibility clause
The Cryo Bio System company cannot be held responsible for any damage
due to external effects or to inappropriate handling or usage.
See the paragraphs on scope of application and electrical specifications on page 2
of these instructions for use.
