CruzPro MaxVu110, Руководство пользователя

Страница: 8 / 68

Page 8
25 NMEA 0183 input #2A (Display NMEA Depth, Wind, GPS data, etc)
26 NMEA 0183 input #2B (Display NMEA Depth, Wind, GPS data, etc)
27 NMEA 0183 input #3A (Display NMEA Depth, Wind, GPS data, etc)
28 NMEA 0183 input #3B (Display NMEA Depth, Wind, GPS data, etc)
29 NMEA 0183 input #4A (Display NMEA Depth, Wind, GPS data, etc)
30 NMEA 0183 input #4B (Display NMEA Depth, Wind, GPS data, etc)
31 Remote Hardware Data Display #1 (For future expansion options)
32 Remote Hardware Data Display #2 (For future expansion options)
33 Trim Angle (See Note 1 - Auxiliary Input #1)
34 External Backlight ON/OFF control
Note 1 - Auxiliary Input #1. The Yellow #3 wire can be programmed to be:
a) Additional Tankage input (Water, fuel, holding tank - See Note 3)
b) Third Temperature input (See Note 4)
c) Trim Angle input (See Note 2)
Note2 - Engine temperature, oil pressure, trim angle and fuel senders are not
supplied. Transducers to measure boat speed, sea water temperature and depth
are not supplied but available separately.
Note 3 - Works with any standard resistive tank sender (European or Ameri-
can). Sender not supplied.
Note 4 - Temperature senders (such as seawater temperature, refrigerator tem-
perature, engine room or battery temperature, etc.) not supplied but available
separately in a variety of different formats.